Category: Mold
Mold assessment, remediation and verification.
Mold vs Mildew: What the Words Mean and What Changes Cleanup
EPA calls mildew a kind of mold. What the garden mildews are, why the bleach spot test only separates mildew from dirt, and how material and area set the cleanup.
Mold in Basement: Where It Grows, Why, and the Fix Order
Why mold in basement walls grows behind plastic and batts, what BSC, DOE and EPA say to build instead, EPA’s scope by area, published prices and the fix order.
Mold on Wood: Surface Mold, Stain or Rot, and What to Do
Mold, mildew, sap stain or rot? The FPL depth test, the 20% and 30% moisture lines, framing lumber, furniture, borate labels and a seven step decision path.
Musty Smell in Basement: Find the Cause, Then Fix It
What causes a musty smell in a basement, how to tell it from sewer gas, EPA humidity targets, the ASTM D4263 plastic sheet test, and fixes ranked by published cost.
Black Mold vs Regular Mold: What Colour Can and Cannot Tell You
EPA says black mold is not a species. How Stachybotrys differs from Cladosporium, Aspergillus niger and Alternaria, why testing rarely helps, and what sets scope.
How Long Does It Take for Mold to Grow After Water Damage?
EPA and FEMA say dry within 24 to 48 hours. Lab data shows why: gypsum board grew mold within a week at 95% RH, cement board none in 12 weeks, cold slows…
DIY Mold Remediation: EPA’s 10 Square Foot Rule and Limits
When DIY mold cleanup is reasonable under EPA’s 10 square foot guideline, the hard stops, what to clean or discard, PPE, bleach and a step-by-step method.
How Long Does Mold Remediation Take? Phases and Real Delays
Phase-by-phase mold remediation durations from named firms, lab turnaround, Texas, New York and Florida rules that add days, and insurer deadlines.
The Mold Remediation Process: 8 Steps, In Order
Moisture source, containment, negative air, removal, cleaning, drying, verification. Why the order matters and why containment sets the cost floor.
Signs of Mold in an Attic, and What Causes It
Dark staining on the north-facing sheathing, frost on nail points, a musty hatch. What each sign means, what is not mould at all, and why the cause is usually ventilation rather than…
Attic Mold Removal Cost 2026: $1,500 to $10,000
Cost tiers from $1,500 to $10,000, why the cause is almost always ventilation rather than a roof leak, and why roof sheathing is cleaned in place instead of removed.
Mold Inspection Cost 2026: $300 to $1,000 Typical
Mold inspection cost runs $300 to $1,000 for a house, plus roughly $30 to $75 per laboratory sample. What a real assessment includes, why the outdoor control sample decides whether results mean…