Category: Mold
Mold assessment, remediation and verification.
Mold in Coffee Maker: 10 Wet Parts and What Each Maker Prints
Mold in coffee maker reservoirs: NSF found it in 50% of 22 homes. A parts map of drip, pod and capsule machines with each maker’s printed vinegar or descaler rules.
Mold or Dirt? 7 Tests Ranked, From a 2 Minute Bleach Drop to a Lab
Mold or dirt? Seven checks ranked by reliability, from Purdue’s 2 minute bleach drop to a $68 to $328 lab tape lift, plus why straight ceiling lines over joists are usually soot.
Black Mold in Apartment: Tenant Steps and 8 State Repair Clocks
Black mold in an apartment, statute by statute: notice rules, repair clocks from 96 hours to 30 days in 8 codes, NYC HPD classes, repair and deduct and escrow limits.
Mold on Grout: Why Cement Grout Holds It and Epoxy Does Not
Cement grout absorbs up to 10% water, epoxy 0%. Which cleaner each grout type tolerates, why mosaics grow more mold, and the 2/3 depth rule for regrouting.
Mold on Shoes: What to Wash, Wipe or Bin, Material by Material
Mold on shoes by material: which parts makers say can be machine washed, the NDSU alcohol mix for suede, why EPA logic bins foam insoles, and why closets at 50% RH still…
How Does Mold Spread? 4 Routes, Spore Fall Times, mm per Day
How mold spreads by air, HVAC, growth and disturbance: a 3 µm spore takes about 2.2 hours to fall 8 ft, hyphae creep 1 to 5 mm a day, and what stops…
Does Sunlight Kill Mold? Hours of Sun per 90% Spore Kill
Sunlight has no UV-C. Published UV-A doses mean about 0.7 to 7.8 hours of clear sun per 90% spore kill on the lit face; drying, not UV, does most of the work.
Can Mold Grow on Metal? Yes, on Dust and Paint: 6 House Metals
MIL-STD-1250A lists metals as funginert, so mold on metal feeds on dust and paint films. A six metal table, a dew point chart and EPA cleanup methods.
Mold Behind Wallpaper: Why 0.5 Perm Vinyl Traps It on AC Walls
Vinyl wallpaper tested at 0.5 perm traps inward summer vapor; NIST found the drywall face above 80% RH for 5 months. How to check, size and strip it per EPA.
Mold on Brick: Identify It, Then Clean Under 400 psi by Type
Mold, algae, lichen or salt on brick, told apart, then a cleaning matrix by brick type with BIA and NPS pressure limits (100 to 400 psi) and bleach mixes as published.
Can Mold Grow on Plastic? Yes: 6 Plastics, Clean or Toss
Mold on plastic feeds on dust and soap film; plasticized PVC and polyurethane foam can feed it themselves. A six plastic table, ASTM G21 rating and sealant soak data.
Does Mold Come Back After Remediation? 8 Failure Modes
Why mold returns after remediation: 8 failure modes tied to EPA guidance, plus the post-remediation rules in New York Labor Law 947, Texas 16 TAC 78.140 and Florida.